Gateway DVD Player - Manual (Page 77)

71 www.gateway.com
2
Place the disc in the tray with the label side facing up. If the disc has no label and
both sides are playable, make sure that the playback side you want is facing down.
3
Press OPEN/CLOSE to close the disc tray. The disc begins playing. If the disc is scratched,
dirty, or if the DVD is not encoded for Region 1, the disc will not play.
4
If the disc does not automatically begin playing, press PLAY on the remote control
or on the front of the player.
5
Press the following remote control buttons for other playback features:
Caution Always press STOP to stop playback of a disc before turning off
the player.
Button Function
PAUSE/STEP Press to freeze at the current frame during playback. Press again
to advance one frame at a time. Press
PLAY to resume normal
playback.
PREV/NEXT Press to skip to the previous or next chapter or track.
REV/FWD Press repeatedly to scan backward or forward at variable speeds
during playback.
SLOW Press repeatedly to play in slow motion at variable speeds.
STOP Press to stop playback, then press PLAY to resume playback.
Press STOP twice to stop playback and start over at the main menu.