Gateway DVD Player - Manual (Page 24)

18 www.gateway.com
Connecting the player
Connecting to your audio/video system
To connect your player to your audio/video system:
1
Make sure that all video components are turned off.
2
Connect the player to your TV or other video device in one of three ways:
■ Video out (composite)
Connect one end of the supplied yellow video cable to the VIDEO OUT jack on the
back of the player, then connect the other end to the jack on your TV or other
video device.
■ S-Video out
Connect one end of an S-Video cable (not included) to the S-VIDEO OUT jack on
the back of the player, then connect the other end to the S-Video jack on your
TV or other video device.
■ Component/Progressive video (best video quality)
Connect one end of each component video cable (not included) to the
PROGRESSIVE/COMPONENT Cb/Pb , Y , and Cr/Pr jacks on the back of the player, then
connect the other ends to the corresponding color-coded jacks on your TV or other
video device.
Important Write your player’s order number inside the front cover of your user’s
guide. You will need the order number as proof of purchase if you
contact Technical Support.
Video connection Quality
Video out (composite) Good
S-Video out Better
Component/progressive Best