Gateway DVD Player - Manual (Page 31)

25 www.gateway.com
Configuring Dolby Digital
This setting configures the format of Dolby Digital 5.1 output signals.
To set your Dolby Digital preferences:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Digital , then press ENTER . The
Digital audio setup menu opens.
3
Highlight Dolby , then press the buttons to select:
■ Bitstream
Outputs raw 5.1-channel digital signals from the optical or coaxial digital audio
jacks. Use this setting when the player is connected to an external amplifier with
a Dolby Digital decoder.
■ Off
Turns off Dolby Digital output.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
4
Highlight OK , then press ENTER .