Playing discs, To play a disc – Gateway DVD Player User Manual
Page 76
70
www.gateway.com
Playing discs
Before you begin:
1
Turn on the player using the
POWER
button on the front of the player. If the player
is in Standby power mode, press
POWER
on the remote control. The Power LED turns
green.
2
Turn on your TV, then set it to the audio/video input connected to the DVD player.
3
Turn on your audio system (if using an external amplifier or audio system), then set
it to the audio input connected to the DVD player.
To play a disc:
1
Press
OPEN/CLOSE
on the remote control or on the front of the player. The disc tray
opens.