Gateway DVD Player - Manual (Page 34)

28 www.gateway.com
Configuring LPCM
This option sets the outgoing digital audio format of LPCM tracks.
To set your LPCM output format:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Digital , then press ENTER . The
Digital audio setup menu opens.
3
Highlight NextPage , then press ENTER .
4
Highlight LPCM , then press the buttons to select:
■ Original
Outputs the LPCM digital audio signals from the optical or coaxial digital audio
jacks in its original format.
■ Off
Turns off LPCM audio output.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
5
Highlight OK , then press ENTER .