Grizzly G1095/G1096 - Manual (Page 6)

-4-
Model g1095/g1096 1-hp power Feeder
The information contained herein is deemed accurate as of 4/20/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2 Model G1095
Operation Info
No. Of Feed Speeds......................................................................................................................................... 4
Feed Speeds........................................................................................................................ 13, 26, 36, 72 FPM
Swing.................................................................................................................................................... 360 deg.
Vertical Movement................................................................................................................................. 9-1/2 in.
Horizontal Movement........................................................................................................................... 24-1/4 in.
Rotation.................................................................................................................................. Forward, Reverse
Roller Info
No. Of Rollers....................................................................................................................................................4
Roller Width............................................................................................................................................2-3/8 in.
Roller Diameter...................................................................................................................................... 4-3/4 in.
Roller Suspension..................................................................................................................................... 3/4 in.
Max Hght Rollers Parallel Table Surface............................................................................................... 8-1/2 in.
Centers Between Rollers..............................................................................................................................5 in.
Other
Column Diameter................................................................................................................................... 2-1/4 in.
Construction Info
Roller Construction.................................................................................................................. Synthetic Rubber
Housing Construction................................................................................................................. Cast Aluminum
Supports Construction..........................................................................................................................Cast Iron
Column Construction.................................................................................................................................. Steel
Paint..........................................................................................................................................................Epoxy
Other Specifications:
ISO Factory ...................................................................................................................................................ISO 9001
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ................................ "Checked" Sticker, On In-feed Portion Of Housing's Roller Cover Side
Assembly Time ........................................................................................................................................... 45 minutes
Features:
Rollers are Spring Tensioned with 3/4" Travel
Heavy-Duty Gear Reduction with Hardened Gears
Universal Positioning with Handle Locks