Grizzly G1095/G1096 - Manual (Page 18)

-16-
Model g1095/g1096 1-hp power Feeder
the unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. remove
this protective coating with a solvent cleaner or
degreaser, such as shown in
Figure 6. For thor-
ough cleaning, some parts must be removed.
For optimum performance, clean all moving
parts or sliding contact surfaces. Avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac-
es. Always follow the manufacturer’s instructions
when using any type of cleaning product.
clean up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOt use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent cleaner & Degreaser
A great product for removing the waxy shipping
grease from your machine during clean up.
Figure 6. Cleaner/degreaser available from
grizzly.
Figure 8. Assembled power feeder.
Figure 7. item installation order.
to correctly position this power feeder on your
table top, assemble the power feeder base assem-
bly in the order shown in
Figure 7 (refer to the
parts diagram for any intricate details).
assembly
next, connect the stand to the power feeder, as
shown in
Figure 8. With your power feeder unit
completely assembled, it will be easier for you to
determine where on the table top to drill your base
mounting holes, so you can take advantage of the
full range of power feeder swing and adjustments.
refer to
base Mounting on Page 17.