Wheel replacement – Grizzly G1095/G1096 User Manual
Page 26

-24-
Model g1095/g1096 1-hp power Feeder
to replace a worn out or damaged wheel:
1. disConneCt the poWer Feeder
FroM poWer!
2. using a 5mm hex wrench, remove the wheel
retaining cap screws (
Figure 17).
Wheel Replacement
always disconnect power
to the machine before
performing installation
or maintenance. Failure
to do this may result in
serious personal injury.
3. swap the old wheel with the new one.
4. reinstall the four cap screws, and tighten in
an alternating pattern until the wheel is tight.
Figure 17. Wheel cap screws.
Cap
screw
See also other documents in the category Grizzly Tools:
- H7670 (20 pages)
- H7792 (20 pages)
- H7947 (24 pages)
- G7958 (16 pages)
- G1007 (52 pages)
- G9861 (56 pages)
- G9861 (56 pages)
- Extreme Series Jointer G9860 (76 pages)
- H6331 (20 pages)
- G4179 (32 pages)
- G0500 (71 pages)
- T10446 (16 pages)
- G0463 (40 pages)
- H6143 (20 pages)
- G8125 (2 pages)
- H0800 (6 pages)
- POWER FEED H8370 (4 pages)
- H8116 (20 pages)
- G4003 (55 pages)
- G7948 (2 pages)
- T10010 (28 pages)
- H7668 (24 pages)
- Extren Series Jointer g9860 (76 pages)
- Panther 5 Shelf Unit T10001 (2 pages)
- 28 clipped head framing nailer h6145 (20 pages)
- G1021Z (39 pages)
- H7949 (32 pages)
- Extreme Duty Planners G9740 (76 pages)
- G4008 (26 pages)
- H8154 (1 page)
- 3/8" Impact Wrench w/ Front Exhaust H8119 (2 pages)
- Model H8222 (16 pages)
- G9953ZXF (76 pages)
- COMBINATION SANDER G1183 (48 pages)
- H7758/H7759 (28 pages)
- Extreme-Duty s G9740 (76 pages)
- G2790 (23 pages)
- G0633/G0634 (72 pages)
- G1006 (23 pages)
- Flex Shaft G9928 (12 pages)
- G0456 (48 pages)
- H8170/H8171 (32 pages)
- H7943/H7944 (24 pages)
- H0777 (10 pages)
- 5 GALLON AUTOMATIC MIXING PAINT TANK H8226 (16 pages)