Grizzly H8192 - Manual (Page 21)

Model h8192 (Mfg. Since 8/07)
-19-
SECTION 4: OpERATIONS
Damage to your eyes and lungs could result
from using this machine without proper
protective gear. Always wear safety glasses
and a respirator when operating this
machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
and long hair away from
moving machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONgLy
RECOMMEND that you read books, trade
magazines, or get formal training before
beginning any projects. Regardless of the
content in this section, grizzly Industrial
will not be held liable for accidents caused
by lack of training.
Operation Safety Disc Sanding
Always keep the workpiece on the left side
of the wheel that rotates down toward the
table. This will keep the workpiece from
flying out of your hands due to kickback.
To use the sanding disc:
1. diSConnECt thE SAndEr FroM
poWEr!
2. Adjust the angles of the disc sanding table
and the miter gauge for your operation.
3. Connect the sander to power, turn it ON, and
allow it to reach full speed.
4. place the workpiece on the table and firmly
against the miter gauge.