Stovax PR0919 - Manual (Page 7)

7
USER INSTRUCTIONS
5. ARRANGEMENT OF FUEL BED
5.1 If you need to replace pebbles or refill the tray, make sure
the pebbles are flattened so they are level with the rim of
the tray.
TAkE CARE NOT TO SPILL PEBBLES INTO THE PILOT
AREA
ONLY PEBBLES SUPPLIED BY GAZCO CAN BE USED IN
THIS FIRE
6. FLAME FAILURE DEVICE
6.1 This is a safety feature incorporated on this appliance which
automatically switches off the gas supply if the pilot goes
out and fails to heat the thermocouple.
7. RUNNING IN
7.1 The surface coating on the metal used in your GAZCO fire
will "burn off" during the first few hours of use producing a
harmless and temporary odour. This will disappear after a
short period of use. If the odour persists, ask your installer
for advice.
8. SERVICING
8.1 The fire must be serviced every 12 months by a qualified
Gas Engineer. In all correspondence always quote the
Model number and the Serial number which may be found
on the data badge.
9. VENTILATION
12.1 Any purpose provided ventilation should be checked
periodically to ensure that it is free from obstruction.
10. INSTALLATION DETAILS
13.1 Your installer should have completed the commissioning
sheet at the front of this book. This records the essential
installation details of the appliance. In all correspondence
always quote the Model number and Serial number.
11. HOT SURFACES
14.1 Parts of this appliance become hot during normal use.
• Regard all parts of the appliance as a ‘working surface’
• Provide a suitable fire guard to protect young children
and the infirm
12. FIRE WILL NOT LIGHT
15.1 If you cannot light the Studio:
• Check that the emergency shut off switch is in the ON
(1) position, see Section 2, Emergency Shut Off
• Check and change the batteries in the remote handset
• Check and change the appliance batteries, Section 4.
Consult your Gazco dealer if the Studio still does not light.