Stovax PR0919 - Manual (Page 27)

27
9
AR1868
• Slide the burner to the right and out of its location
• Refit in reverse order
When refilling the stone pebbles, fill to the level of the rim
of the burner tray and flatten level.
Ensure no stone pebbles fall into the pilot area.
7. MAIN CONTROL ASSEMBLY
7.1 To access the main control assembly, first remove:
• the decorative frame
• window frame
• enamelled panels
• main burner
7.2 To remove the access panel:
• Undo the two screws, Diagram 10
• Note the orientation of the access panel with the
return edges facing forward
10
AR1869
7.3 Isolate the gas supply at the isolation device and disconnect
the gas inlet, Diagram 11.
11
AR1888
7.4 Remove the six screws securing the control assembly,
Diagram 12.
12
AR1869
7.5 The control panel can now be tilted back to reveal the
controls, Diagram 13
13
AR1871
7.6 Disconnect the two cables marked ‘A’ in Diagram 14.
14
AR1873
A
B
C
A
• Disconnect the battery extension lead, Diagram 14, B
• Disconnect the touch pad extension lead, Diagram 14, C
The control assembly can now be lifted up and removed.
• Reassemble in reverse order
SERVICING INSTRUCTIONS
REPLACING PARTS