Inventory – Grizzly G0636X User Manual

Page 13

G0636X 17" Ultimate Bandsaw

-11-

Inventory

The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.

Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.

Crate Contents (Figure 4):

Qty

A. Bandsaw (not shown) ................................. 1

B. Cast Iron Fence Assembly ......................... 1

C. Resaw Fence ............................................. 1

D. Guide Post Handwheel .............................. 1

E. Miter Gauge ................................................ 1

Hardware and Tools:

Qty

•

Eye Bolts M10-1.5 x 15 .............................. 2

•

Fence Handle M8-1.25 x 20 (Fence) ........ 1

•

Hex Nut M8-1.25 (Fence) ........................... 1

•

Resaw Fence Lock Handle

M8-1.25 x 44 (Resaw Fence) ..................... 1

•

Flat Washer M8-1.25 x 30 (Resaw Fence) 1

•

Moving Plate (Resaw Fence) ..................... 1

•

Open End Wrench 10 x 13mm ................... 1

•

Open End Wrench 17 x 19mm ................... 1

•

Hex Wrench 5mm & 6mm .....................1 Ea

•

Cap Screw M6-1 x 25 (Handwheel) ........... 1

Figure 4. G0636 crate contents.

If any nonproprietary parts are missing (e.g. a

nut or a washer), we will gladly replace them; or

for the sake of expediency, replacements can be

obtained at your local hardware store.

SUFFOCATION HAZARD!

Immediately discard all plas-

tic bags and packing materi-

als to eliminate choking/suf-

focation hazards for children

and animals.