First Alert FA1220CV - Manual (Page 46)

– 46 –
QUICK GUIDE TO
FA1220CV SYSTEM FUNCTIONS
FUNCTION PROCEDURE COMMENTS
Check Zones Press [ ✱ ]. To view faulted zones when system not ready.
Display All Press and hold [ ✱ ] Displays all alpha descriptors programmed by installer.
Descriptors for 5 seconds
Arm System Enter code. Arms system in mode selected.
Press arming key desired.
(AWAY, STAY, INSTANT,
MAXIMUM)
Disarm System Enter code. Disarms system and silences alarms.
Press OFF [1]. Exits Test mode; unbypasses previously bypassed zones.
Bypass zones Enter code. Bypassed zones are unprotected and will not
Press BYPASS [6]. cause an alarm if violated.
Enter zone numbers to be
bypassed (use 2-digit entries).
Quick Bypass Enter code. Bypasses all faulted zones automatically.
Press BYPASS [6] + [#].
Chime Mode Enter code. Keypad will sound if doors
Press CHIME [9]. or windows are violated while system disarmed.
Test Mode Enter code. Sounds alarm sounder and allows sensors to be tested.
Press TEST [5]. No reports are sent to the central station.
View Messages Press and hold [0] for at least Message from central station will appear.
5 seconds.
View User Enter user's code. Displays partitions & authority
Capabilities Press [ ✱ ] + [ ✱ ]. levels assigned to the user.
Limited Use User Enter your code + [#] + [8][4]. Master or manager level codes only.
(Auth. Level 7) Enter the number of uses 01-15.
Technical Manuals Online! - http://www.tech-man.com