First Alert FA1220CV - Manual (Page 31)

– 31 –
SECURITY CODES & AUTHORITY LEVELS
To Change a User's
Code
CODE
1. Enter Master/Manager code and press the 8 key + user number to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO , 1 = YES
The system will recognize that the user number is already in use
and will prompt whether or not this is a new user. Enter 0 to
change the user's code to the code entered in step 2.
USER 02 CHANGED
SUCCESSFULLY
The system confirms that the change is allowed based on
authorization level, and if so, puts the new code into effect.
Note that if changing one’s own code, the system will prompt for
the new code to be reentered. This prevents accidentally changing
a high level code.
To Delete a User
CODE
1. Enter the Master or Manager code and press the 8 key + User Number to be
deleted.
2. Enter the same Master or Manager code again.
OK TO DELETE
0 = NO , 1 = YES
The system will recognize that the user number is already in use
and will prompt to confirm that it should be deleted. Press 0 (NO)
or 1 (YES).
USER CODE
DELETED
If yes, that user's code is removed from all partitions to which it
was assigned, and all authority levels and other information about
that user is deleted. Note that a user can only be deleted from the
partition in which it was first assigned, and can only be deleted by
a user with a higher authority level. A User's security code cannot
be deleted by oneself.
Technical Manuals Online! - http://www.tech-man.com