First Alert FA1220CV - Manual (Page 23)

– 23 –
CHIME MODE
Using the 9
Key
Your system can be set to alert you to the opening of a door or window while it is disarmed by
using CHIME mode. When activated, the Not Ready message is displayed and three tones
sound at the Keypad whenever a protected perimeter door or window is opened. Pressing the
READY key will display the open protection points.
Note that Chime mode can be activated and de-activated only when the system is disarmed.
CHIME
1. To turn Chime Mode on, enter the security code and press 9 .
CHIME MODE ON The CHIME MODE ON message will appear for about two seconds
then disappear. To display this message again (to determine
whether chime mode is on or off), simply press and hold down the
CHIME key for 5 seconds.
CHIME
2. To turn Chime Mode off, enter the security code and press 9 again.
CHIME MODE OFF The CHIME MODE OFF message will appear for about two
seconds then disappear. To display this message again (to
determine whether chime mode is on or off), simply press and hold
down the CHIME key for 5 seconds.
Technical Manuals Online! - http://www.tech-man.com