First Alert FA1220CV - Manual (Page 30)

– 30 –
SECURITY CODES & AUTHORITY LEVELS
To Add a User
(continued)
GLOBAL ARM ?
0 = NO , 1 = YES
Press 1 (YES) if this user will be allowed to arm both partitions at the
same time from one keypad. Press 0 if this user will arm only his
assigned partition, or another partition individually.
PART.2 - SHOP?
0 = NO , 1 = YES
The keypad now prompts for the user’s access to the next partition
(see GOTO command). Again press 0 or 1. If yes, the system will
automatically assign a user number for use in that partition and will
prompt for the authority level and global arm option for this user
within the partition (see previous steps).
PART. 1 * WHSE
USER 03 AUTH = 3G
When both partitions have been displayed, the keypad scrolls
through the partition(s) to which access has been assigned, and will
display the user number, authority level and global arm option for
each. Note that the “G” following the authority level indicates that the
global arm feature has been selected for this user in the displayed
partition,. The "
✱ " indicates the partition from which the user can be
changed or deleted.
Limited Use User
(#84 Command)
To set the usage count for users with authority level 7, enter #84. The following prompt will
appear.
CODE USE LIMIT
01-15 00 = QUIT
Enter the number of times these users will have access to the system. These codes
automatically expire (but the codes are not deleted) after this number of uses. To reactivate
the codes, simply enter #84 and set a new usage limit.
Technical Manuals Online! - http://www.tech-man.com