First Alert FA1220CV - Manual (Page 13)

– 13 –
CHECKING FOR OPEN ZONES
Using the ✱
READY Key
Before arming your system, all protected doors, windows and other protection zones must be
closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not
Ready" message. Pressing the READY key will display all zones that are faulted, making it
easier for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
Note: Some keypads light a green LED when the system
✴ TO SHOW FAULTS
is ready. If not lit, the system is not ready to be armed.
READY
1. Do not enter security code, but simply press ✱ .
FAULT 05 FRONT
UPSTAIRS BEDROOM Typical fault display
2. DISARMED
READY TO ARM
Secure or bypass the zones displayed before arming the system.
The "Ready" message will be displayed † when all protection zones
have been either closed or bypassed.
† NOTE: All or part of this message may be replaced by a customized
message programmed by the installer. Bear this in mind whenever the
instructions indicate that the "DISARMED" or "READY" message will be
displayed.
Technical Manuals Online! - http://www.tech-man.com