First Alert FA1220CV - Manual (Page 16)

– 16 –
BYPASSING PROTECTION ZONES
Quick Bypass Your system may allow you to easily bypass all open (faulted) zones without having to enter
zone numbers individually. Ask your installer if this feature is active for your system.
Note: All bypasses are removed when an OFF sequence (security code plus OFF) is
performed.
To use the Quick Bypass feature:
BYPASS
1. Enter your security code and press 6 then press # .
2. BYPASS 07 FRONT
UPSTAIRS BEDROOM
Typical bypass message
In a few moments, all open zones will be displayed along with the
word BYPASS. Wait for these zones to be displayed before
arming. Arming the system before bypassed zones are displayed
eliminates all bypasses.
3. DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad displays the
"ready" to arm message. Bypassed zones are unprotected
and will not cause an alarm when violated while your system
is armed.
Displaying
Bypassed Zones
For determining what zones have been previously bypassed.
BYPASS
1. Enter your security code and press 6 .
2. Wait for all bypassed zones to be sequentially displayed.
Technical Manuals Online! - http://www.tech-man.com