First Alert FA1220CV - Manual (Page 35)

– 35 –
FA1220CV EVENT LOGGING PROCEDURES
General Information
The system has the ability to record various events in a
history log wherein each event is recorded in one of five
categories (listed on other side), with the time and date
of its occurrence. The Event Log holds up to 100 events,
with the oldest event being replaced by the logging of
any new event after the log is full. Using an alpha
keypad, the Event Log can be viewed one category at a
time, or can display all events, regardless of category
(ALL EVENT LOG). The system also allows selection of
displaying the COMPLETE log, or only those events
occurring since the last installer service (RECENT). In
addition, events in the other partition can be viewed by
users authorized to access that partition. Note that
events are displayed in chronological order, from most
recent to oldest.
To Display The Event Log:
1. Enter CODE + [#] + [6] + [0]
2. Select the display mode.
RECENT: Displays only those events occurring since
last installer service.
COMPLETE: Displays complete event log (up to 100
events).
Press the desired key, 0 or 1.
ENTER 0 = RECENT
1 = COMPLETE
3. Select the partition, 0-2.
Enter the partition number for the partition whose
events are to be displayed.
Entering 0 (NO) will display all partitions' events.
SCAN LOG BY PART
0 = NO 1–2 = PART #
Technical Manuals Online! - http://www.tech-man.com