First Alert FA1220CV - Manual (Page 25)

– 25 –
PANIC KEYS
(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS)
Using
Panic Keys
Your system may have been programmed to use special key combinations to manually activate
panic functions. The functions that might be programmed are Silent Emergency, Audible
Emergency, Personal Emergency, and Fire. See your installer for the function(s) that may have
been programmed for your system.
Active Panic Functions
(your installer should note which
function(s) is active in your system)
Keys Zone Function
1 and ✱ 95
3 and # 96
✱ and # 99
A* 95
B* 99
C* 96
* May not be present on your keypad(s).
To use a paired key panic function,
simply press both keys of the assigned
pair at the same time. If your keypad(s)
have lettered keys for panic functions,
press the designated key and hold
down for at least 2 seconds to activate
the panic function.
A silent emergency will send a silent alarm
signal to the central station, but there will be no
audible alarms or visual displays.
An audible emergency will send an emergency
message to the central station (if connected) and
will sound a loud, steady alarm at your keypad
and at any external sounders that may be
connected ( ALARM plus a zone number would
also be displayed).
A personal emergency alarm will send an
emergency message to the central station (if
connected) and will sound at keypads, but not at
external bells or sirens. (ALARM plus a zone
number would also be displayed)
A fire alarm will send a fire alarm message to
the central station and will uniquely sound
external bells and sirens (FIRE plus a zone
number would also be displayed).
Technical Manuals Online! - http://www.tech-man.com