15 setting data 4 to data output – Furuno GP-150-DUAL User Manual
Page 83
10. INSTALLATION
10-15
Setting DATA 4 to Data Output
1) Press
MENU ESC, 9 and 5 to show the DATA4 I/O SETUP menu.
DATA 4 I/O SETUP 1/2
To Next Page
ENT : Enter
MENU : Escape
Appears only when external
DGPS receiver is used.
DATA 4. Level
RS232C
RS422
Data
Out
Com. DGPS
: Select
DATA4 I/O SETUP menu
2) Press to select DATA 4. Level.
3) Press or to select level of external equipment; RS-23C or RS422.
4) Press the
CU/NU ENT key.
5) Press or to select Out.
6) Press to go to the next page to show the DATA I/O SETUP
To Previous Page
Talker ID
GP
LC
DE
Output Data (00-90 sec) 98%
DATA 4 I/O SETUP
MENU : Escape
ENT : Enter
Data Fmt.
V1.5
V2.0
IEC
1. AAM:00 APA:00
APB:04 BOD:00
2. BWR:00 BWW:00 GGA:00 GLL:01
3. RMB:01 RMC:00 VTG:01 WCV:00
4. WNR:00 WPL:00 XTE:00
ZDA:01
5. GNS:00 GBS:01 Rnn:00
RTE:00
DATA4 I/O SETUP
7) Follow "DATA 1 output setting" from step 2.
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)