Furuno GP-33 - Manual (Page 59)

7. OTHER FUNCTIONS
7-9
4. Select data desired, and press the ENT key.
5. Repeat steps 3 and 4 to set other data.
You can select digital data also from the User display 1 (display [6]) and 2 ([7]) directly.
1. Press the DISP key several times to show User display 1 or 2 desired, and press
the ENT key to show the cursor.
2. Operate the cursorpad to select the column to select data, and press the ENT key.
3. Select the item to show, and press the ENT key.
4. Repeat steps 2 and 3 for other displays if necessary.
Speedometer
When choosing [speedometer], you can select the range for the speedometer to
show on the User display 1 or 2.
15.8
Cursor (displayed approx. seven seconds)
23.9
Volts (V) SOG (kn)
300
COG M( )
100.0
Trip (nm)
㪧㪸㪾㪼㩷㪈 㪧㪸㪾㪼㩷㪉
ODO: Odometer distance
Trip: Trip distance
Time: Time
Date: Date
POSN: Position
Volts: Power voltage
SOG: Speed over ground
COG: Course over ground
RNG: Range
BRG: Bearing XTE: Cross-track error
TTG: Time to go
(to destination)
ETA: Estimated time to
arrival (to destination)
WPT: Range and bearing
to waypoint
None: No display
㩿㫂㫅㪃㩷㫄㫇㪿㪀 㩿㫂㫄㪆㪿㪀