5system menu, 5 system menu – Furuno GP-33 User Manual
Page 55
7. OTHER FUNCTIONS
7-5
Display
Select the position format.
• xx.xxx’: Shows L/L position with no seconds.
• xx’xx.x”: Displays L/L position with seconds.
• LC TD: Loran C TDs
Loran C
When choosing LC TD at Display, do the following:
1) Press the ENT key.
2) select the GRI code, and press the ENT key.
3) Press X and ENT key.
4) Select the pair of slave station, and press the ENT key.
UTD1, UTD2
Enter TD offsets to refine Loran C position accuracy.
7.5
System Menu
In the System menu, you can customize various display settings, for example, time
and date formats, etc.
Key Beep
This item turns the key beep on or off.
Units
The Units item lets you select the unit of measurement for range, speed and distance,
from the units shown below.
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)