Furuno GP-33 - Manual (Page 13)

1. OPERATIONAL OVERVIEW
1-3
1.3 How to Adjust LCD and Key Panel Brilliance
1. Press the /BRILL key to show the following window.
2. To adjust the LCD brilliance, press /BRILL key.
The setting changes “0 →1→…→7→6…0→1…” continuously. Maximum setting
is 7. You can use also the cursorpad (W, X) to adjust the brilliance.
3. To adjust the panel brilliance, press the cursorpad (S, T, max: 7).
4. Press ENT or MENU/ZOOM key.
1.4 Display Modes
Your unit has seven display modes: Plotter Display, Highway Display, Steering Dis-
play, Nav Data Display, Satellite Monitor Display and User Display 1/2. Press the
DISP key to select a display mode. Each time the key is pressed, the display mode
changes in the sequence shown below. To step through the displays in reverse order,
press the DISP key more than three seconds.
DISP DISP
DISP
DISP
DISP DISP
DISP
[1]: Plotter display
20.0
350
[2]: Highway display
299
166
0.46
14.6
N
E
[3]: Steering display
14.6 300
0.46 299
00 15
[4]: Nav Data display
14.6 300
135 21.074
34 44.589
N
E
[5]: Satellite Monitor display [6]: User display 1
40.0
N
E
[7]: User display 2
40.0
1.60
12.0 133
32
30
28
25
22
17
15
13
11
08
05
02
05
02
25
05
02
3230
17
13
22 08
11