3waas menu, 4position display format, 3 waas menu – Furuno GP-33 User Manual
Page 54: 4 position display format
7. OTHER FUNCTIONS
7-4
7.3
WAAS Menu
Mode
You can select GPS or WAAS for the position fixing mode.
WAAS Search
For WAAS setting, the GEO satellite is searched automatically or manually. For GEO
satellite number, see page AP-3.
Auto: The system automatically searches for the optimum GEO satellite from your
current position. (All satellites are searched.)
Manual: Enter a GEO satellite number manually.
Correction Data Set
Use [0] as default setting.
7.4
Position Display Format
Position can be shown in latitude and longitude or TDs (Loran C). Loran C chain data
is programmed into the equipment.
*Use “0” (as default setting).
*
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)