Fortinet 2 SXRC User Manual
Page 7
7
SXRC Remote Control
F
e
a
tures
KEYPAD
Here is a brief description of the soft touch buttons.
M1
- Used to select memory preset 1 or to store current
settings into memory preset 1.
M2
- Used to select memory preset 2 or to store current
settings into memory preset 2.
M3
- Used to select memory preset 3 or to store current
settings into memory preset 3.
M4
- Used to select memory preset 4 or to store current
settings into memory preset 4.
ESC
- Used to exit the current menu.
ENT
- Used to enter the selected menu.
HOME
- Used to return to the Main Menu and other
functions explained later in this manual.
UP
- Used to advance up through menu selections
and/or adjust SXRC and amplifier controls.
DOWN
- Used to advance down through menu selec-
tions and/or adjust SXRC and amplifier controls.
These controls and their usage will be explained later with
more detail in each menu usage section.
M1
M2
M3
M4
ESC
ENT
HOME
RIGHT
- Indicates an action or adjustment of the right
channel.
MUTE
- Indicates you are in the mute menu or the mute
function is active.
GAIN
- Indicates you are in the gain menu.
EQ
- Indicates you are in the equalizer menu.
LPF
- Indicates you are in the low pass filter menu.
HPF
- Indicates you are in the high pass filter menu.
PHASE
- Indicates you are in the phase menu.
KOMP
- Indicates you are in the Kompressor™ menu.
MEM-1
- Memory preset 1 activated or stored.
MEM-2
- Memory preset 2 activated or stored.
MEM-3
- Memory preset 3 activated or stored.
MEM-4
- Memory preset 4 activated or stored.