Fortinet 2 SXRC - Manual (Page 31)

31
SXRC Remote Control
Opera
tion
EQ MENU - Here is where you adjust the selected amplifier’s
single band parametric equalizer.
Use the UP and DOWN keys to scroll
through frequency , boost/cut and
bandwidth and then press the ENT key to
select.
FREQUENCY selects the center frequency of the equalizer and
can be set at any 1/12th octave spaced frequency from 20 Hz -
20 kHz. (
20 Hz to 20325 Hz ) SX.1 Series is 10 Hz to 200 Hz
in 1 Hz Steps.
Use the UP and DOWN keys to select your
frequency. Press the ESC key to save your
setting and return to the frequency ,
boost/cut , bandwidth options menu. You
can now select another equalizer option to
adjust on this amplifier if desired.
bandwidth (better known as Q) can be set from .5 to 10 in .5
increments. In simple terms, lower Q effects more frequencies
around the center frequency while higher Q effects fewer
frequencies around the center frequency.
As an example, if our center frequency is 100 HZ, a Q of .5
(area in gray) effects many more frequencies around 100 Hz
than a Q of 10 (area in black)
There is no right or wrong Q,
you use whatever fits the
needs of the system or
personal taste. KICKER uses
a default Q of 3.
Use the UP and DOWN keys to select your
bandwidth (Q) value and press the ESC to
save your setting and return to the
frequency , boost/cut , bandwidth
options menu. You can now select another
equalizer option to adjust on this amplifier if desired.
Boost/Cut is where you boost or cut the equalizer and has a
range of 36 dB; -18 dB to +18 db in .5 dB steps. Keep in
mind that for every 3 dB of boost you are requiring the amplifier
to use twice as much power in that equalized area. The default
setting from KICKER is
FLAT (No boost or cut).
Use the UP and DOWN keys to adjust your
boost or cut and press the ESC key to
save your setting and return to the
frequency , boost/cut , bandwidth options
menu. You can now select another equalizer
option to adjust on this amplifier if desired.
When you are done adjusting the equalizer on
this amplifier press the
ESC key while in the
frequency , boost/cut , bandwidth
options menu to return to the AMP ADJ menu
and choose another function to adjust.
NOTE:
While you are in the EQ menu the EQ
indicator on the ISIS display is lit. This
indicates you are making adjustments in
the EQ menu.
HOME ENT ESC
HOME ENT ESC
100 HZ
Q=10
Q=.5
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
f f r e e q q u u e e n n c c y y
SYS
MEM-1
GAIN GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT LEFT RIGHT RIGHT