Fortinet 2 SXRC - Manual (Page 47)

Example
You have selected a group to adjust which contains
four amplifiers and the group has the LINK property set to OFF.
The Kompressor™ settings on each amp are as follows:
Amp 1 - Off
Amp 2 - Attack
Amp 3 - Contour
Amp 4 - Red-Line
NOTE:
While you are in the KOMPRESSOR™
menu the KOMP indicator on the ISIS
display is lit. This indicates you are making
adjustments in the KOMPRESSOR™ menu.
See the specifications pages later in this manual for a brief
description of each Kompressor™ setting and some general
guidelines for their use.
47
SXRC Remote Control
Opera
tion
Kompressor MENU - Here you can adjust the selected group’s
Kompressor™ settings. The function will vary depending on if this
is a LINK ON or LINK OFF group. Both functions are described
below.
LINK ON
In a LINK ON group, each amplifier in the group shares the
exact same Kompressor™ setting.
Use the UP or DOWN keys to scroll
through off , red-line , contour or
attack .
Press the ESC key to save your setting and
return to the GROUP ADJ menu and choose
another function to adjust.
LINK OFF
In a LINK OFF group, each amplifier in the group has its own
unique Kompressor setting that has been selected from the AMP
ADJ menu. Here you can, as a group, turn the Kompressor™
OFF or ON, ON being the individual setting you selected from the
AMP ADJ menu.
Use the UP or DOWN keys to scroll
through off and ON .
Press the ESC key to save your setting and
return to the GROUP ADJ menu and choose
another function to adjust.
HOME ENT ESC
HOME ENT ESC
r r e d d - - l l i i n n e e
SYS
MEM-1
GAIN GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT LEFT RIGHT RIGHT
HOME ENT ESC
HOME ENT ESC
If you select the Kompressor™
and turn it
OFF for this group
the amplifier’s Kompressor™
will be set as:
Amp 1 - Off
Amp 2 - Off
Amp 3 - Off
Amp 4 - Off Amp 1 - Off
Amp 2 - Attack
Amp 3 - Contour
Amp 4 - Red-Line
If you select the Kompressor™
and turn it
ON for this group the
amplifier’s Kompressor™ will
be set as: