Furuno NAVpilot NAVpilot-500 - Manual (Page 53)

5. ALARMS
5-2
5.1.1 Selecting the alarm buzzer
You may choose the buzzer from which to output the audio alarm as follows.
1. Rotate the [ENTER] knob to select “AUDIO ALARM” from the ALARM menu.
2. Press the [ENTER] knob to show the audio alarm options window.
INTERNAL +EXTERNAL BUZZER
INTERNAL BUZZER
Audio alarm options window
3. Rotate the [ENTER] knob to select INTERNAL BUZZER or
INTERNAL+EXTERNAL BUZZER as appropriate.
INTERNAL BUZZER: Sounds the buzzer in the control unit.
INTERNAL+EXTERNAL BUZZER: Sounds the control unit buzzer and external
buzzer if connected.
4. Press the [ENTER] knob.
5.1.2 Selecting the beep pattern
The sound pattern of the audio alarm can be selected as follows.
1. Rotate the [ENTER] knob to select “ALARM INTERVAL” from the ALARM
menu.
2. Press the [ENTER] knob to show the alarm interval options window.
LONG
CONTINUE
SHORT
Alarm interval options window
3. Rotate the [ENTER] knob to select SHORT, LONG or CONTINUE as
appropriate.
800 ms
200 ms
800 ms
400 ms
SHORT pattern
LONG pattern
CONTINUE: Beep sounds continuously.
4. Press the [ENTER] knob.