FUJITSU fi-4990C - Manual (Page 85)

6-33
SCSI ID
This function sets the ID number for the SCSI interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
Remarks LCD display
SCSI ID
Options
0 to 7 (Default: 5)
The following is an example of operation when you use this function.
1. In <> initial screen, press
ENTER
.
The <> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “SCSI ID” appears in
the lower line of the menu screen.
3. Press ENTER .
The option select screen appears with the current
setting 5 blinking (blinking indicates “change-
able”).
4. Press or .
The displayed option changes (6, 7, 0, 1, 2, 3, 4).
5. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <>
menu screen (SCSI ID).
6. To quit the <>, turn off the
power.
<>
<>
Paper Length Check
SCSI ID
3
<>
SCSI ID
SCSI ID
5
<>
SCSI ID
14C6.P65 01.2.17, 5:46 PM 33