FUJITSU fi-4990C - Manual (Page 100)

6-48
1. In <> initial screen, press
ENTER .
The <> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “SCSI Bus Width
Setting” appears in the lower line of the menu
screen.
3. Press ENTER .
The option select screen appears with the
current setting 16 bit blinking (blinking indi-
cates “changeable”).
4. Press or .
The displayed option changes (8 bit).
5. Press
ENTER
to save the change.
The LCD returns to the <>
menu screen (SCSI Bus Width Setting).
6. To quit the <>, turn off the
power.
<>
<>
SCSI Bus Width Setting
SCSI Bus Width Setting
8 bit
SCSI Bus Width Setting
16 bit
The following is an example of operation when you use this function.
Remarks LCD display
SCSI Bus Width Setting
Options
16 bit, 8 bit (Default: 16 bit)
<>
SCSI Bus Width setting
<>
Paper Length Check
15C6.P65 01.2.17, 5:47 PM 48