FUJITSU fi-4990C - Manual (Page 60)

6-8
<>
Doublefeed Check
<>
Paper Length Check
Ready
6. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <>
menu screen (Paper Length Check).
7. Press CANCEL two times.
The LCD returns to the Ready screen.
Doublefeed check
This function determines whether or not to enable the paper thickness which is set by the “paper
thickness setup” function to detect a double feed error. You cannot change settings if they are set by
the host computer.
Remarks
OFF: Set the double feed check to Disabled.
Thickness & Roller check:
Detect the double feed by checking the
document thickness and the rotation of brake
roller.
Thickness check:
Detect the double feed by checking the
document thickness.
LCD display
Double feed Check
Options
Off, Thickness Check, Thickness & Roller
(Default: Off)
At pick the paper (Default)
At pick + feed the paper
The following is an example of operation when you use this function.
1. In <> initial screen, press
ENTER
.
The <> menu screen (Paper
Length Check) appears.
2. Press .
The <> menu screen
(Doublefeed Check) appears.
<>
<>
Paper Length Check
13C6.P65 01.2.17, 5:46 PM 8