FUJITSU fi-4990C - Manual (Page 62)

6-10
1. In <> initial screen, press
ENTER
.
The <> menu screen (Paper
Length Check) appears.
2. Press twice.
The <> menu screen (Paper
Thickness Setup) appears.
3. Press
ENTER
.
The paper load prompting screen appears,
requesting adjustment paper.
4. Select thickest paper used for your jobs and put
the paper on the hopper.
<>
<>
Paper Length Check
Paper Thickness Setup
Set the adjustment paper
<>
Paper Thickness Setup
Paper thickness setup
This function sets the paper thickness which is used as the reference for detecting a double feed
error. Whether this function is enabled or disabled is determined by the “paper thickness check”
function in setup mode.
NOTE
This setting cannot be displayed in browse mode.
The following is an example of operation when you use this function.
11. Press CANCEL two times.
The LCD returns to the Ready screen.
Ready
13C6.P65 01.2.17, 5:46 PM 10