FUJITSU fi-4990C - Manual (Page 68)

6-16
The following is an example of operation when you use this function.
1. In <> initial screen, press
ENTER
.
The <> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “Hopper Height”
appears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the current
height setting 1000 sheets blinking (blinking
indicates “changeable”).
4. Press .
The hopper moves to the 500-sheet position and
the new height setting 500 sheets blinks.
NOTE
Each time you press or , the hopper
moves to the next position and its position is
automatically saved. Repeat this operation until
the hopper is positioned at the desired height.
<>
<>
Paper Length Check
<>
Hopper Height
Hopper Height
1000 sheets
Hopper Height
500 sheets
Hopper height
This function sets the initial height of the hopper. Set the height which you frequently use.
Remarks LCD display
Hopper Height
Options
250 sheets, 500 sheets, 1000 sheets
(Default : 1000 sheets)
13C6.P65 01.2.17, 5:46 PM 16