FujiFilm 3000 - Manual (Page 6)

4
SAFETY PRECAUTIONS
Important
In order to ensure the proper use of the PosterPrinter 3000, the instructions in this manual
have been provided with the following markings to indicate those items designed to prevent
damage to property or injury to users of the printer or persons in the vicinity of the printer.
The degree of damage or injury which may result from a failure to follow the instructions in this
manual properly are classified as follows:
CAUTION WARNING
Improper use of the printer may result in
serious injury or death. Improper use of the printer may result in
injury or damage to property.
Different types of instructions to be followed have been marked with the following types of
symbols. (Note that other symbols are also used within this manual.)
Items marked with this symbol are instructions for
procedures which must always be undertaken.
An explanatory picture will accompany the symbol.
Items marked with this symbol are warnings against
actions which should never be undertaken.
An explanatory picture will accompany the symbol.
WARNING
• Do not connect the printer to any power source other than one of the specified voltage.
Doing so may result in fire or electrical shock.
Make sure the printer is connected only to a 120-V power source.
• Do not damage, crease or fold the power cord.
Altering the power cord, placing heavy objects on it, or allowing it to become damaged,
creased, or folded may result in fire or electrical shock.
• Do not connect the printer to a two-way or multiple-way extension cord.
Doing so may result in fire or electrical shock.
• Never insert or remove the plug with wet hands.
Doing so may result in electrical shock.
• Do not remove the cover from the printer.
Doing so may result in electrical shock.
• Always be sure to hold the plug firmly in your hand when removing it from the power
socket, never do so by simply pulling on the cord.
Pulling on the cord to remove the plug from the power socket or applying excessive force
when doing so may cause damage to the cord, which in turn may result in fire or
electrical shock.
• In the event that the printer overheats, begins to emit smoke, or gives off an unusual odor,
turn off the main power switch immediately and remove the plug from its socket.
Continuing to use the printer even after such problems occur may result in fire or
electrical shock.
If any such problems occur, contact the dealer from whom you purchased your PosterPrinter 3000.
• In the event that metal objects, water, or other liquids find their way inside the unit, turn off
the main power switch immediately and remove the plug from its socket.
Continuing to use the printer even after such problems occur may result in fire or
electrical shock.
If any such problems occur, contact the dealer from whom you purchased your PosterPrinter 3000.
WARNING
REMOVING PLUG
1