FujiFilm 3000 - Manual (Page 36)

34
SPECIFICATIONS
Type
Scanning system
Scanning resolution
Input size
Input format
Printing system
Printing modes
Printing resolution
Paper size
Paper types
Output sizes
Paper supply
Paper cutting
Print size and
printing speed
Warm-up time
Noise level
Dimensions/weight
Power supply
Power consumption
Operating environment
Items included in package
Optional accessory
Supplies
desktop type printer
fixed contact image sensor
400 dpi
letter size, banner (8 1/2” wide)
sheet paper, thickness 50 - 350 microns
thermal printing
normal, photo, reverse, online (optional)
300 dpi
A1(23”), A2(17”) wide paper rolls
FUJI FILM Poster Printer paper
Direct Thermal Paper (DTP), Thermal Transfer Paper (TTP), Heavy Duty Poly Paper (HDP)
8"x11", 10"x14", 12"x16", 14"x19", 17"x22", 20"x27", 23"x31"
(33"x44" and 44"x58" are printed in two pieces)
banner (calculated as being roughly equivalent to length of document times specified enlargement)
continuous feed roll paper
bidirectional manual cutter
approx. 8 seconds
approx. 53 dB (A)
approx. 28.1 (W) x 12.4(D) x 8.5 (H) inches; approx. 31 lb.
approx. 715 (W) x 315 (D) x 215 (H) mm; approx. 14 kg
AC120V ± 10% ; 50/60 Hz
at standby: approx. 15W; printing: approx. 210W
temperature: 50 ° - 86 ° F; relative humidity: 20 - 80% RH
paper bracket unit (1), end caps (2), power cord, User's Guide
interface kit
platen rubber, thermal heads, cutter unit, cutter base
Normal • Reverse modes Photo modes
Output size
Enlargement
(line magnification)
DTP TTP • HDP DTP TTP • HDP
17"x22"
23"x31" approx.1.7
approx.2.6 1min 00sec
1min 20sec 1min 10sec
1min 35sec 1min 50sec
2min 35sec 1min 58sec
2min 48sec