FujiFilm 3000 - Manual (Page 16)

14
input
document
PRINTING IN NORMAL MODE
BASIC FUNCTIONS
4
Press the output size key to select the
size of print desired.
The output size is shown here.
Press the mode key to set the printer
in normal mode.
'NORMAL' is shown here.
power switch
Turn the power switch on. Press the paper type key to select the
type of paper being used.
Press the paper type key to match the paper indicated on the display
to the type of paper in use.
Caution
Note that it will be impossible to achieve
normal print contrast if the paper type
indicated on the message display is not the
same as the paper actually being used.
The paper type is shown here.
Caution
Do not turn the power switch off when the
printer is initializing or printing.