FujiFilm 3000 - Manual (Page 12)

10
CONTROL PANEL
No.
1
2
3
4
5
6
7
8
9
10
Name Function
MESSAGE display
PAPER TYPE key
MODE key
OUTPUT SIZE key
CONTRAST key
START/STOP key
FEED key
CLEAR key
ONLINE lamp
READY lamp
The message display indicates the paper type and output color, mode,
output size, contrast, and any operating/error messages.
Press the paper type key to set the type of paper installed in the
printer (DTP, TTP, HDP). If the paper type is set incorrectly,
contrast on the poster may be affected.
Press the mode key to set the desired mode
(normal, photo, reverse).
Press the output size key to set the desired output size.
Press the contrast key to lighten or darken contrast in accordance
with the input document.
Press the start/stop key to either start printing, or to stop
the printing process midway.
Press the feed key to feed the paper through the printer
(approximately 3"/77mm at a time).
The clear key is mainly used when printing in online mode.
(Refer to the Interface Kit User's Guide.)
The printer is in online mode with a computer when this lamp is lit.
The printer is ready to use when this lamp is lit.
2
3
7
9
10
5
4
2
8
6
1
Caution
Remove the protective covering
from the control panel before use.