FujiFilm 3000 - Manual (Page 20)

18
Using A1(23”) paper to produce a 44”x58” size poster
Select the paper type, mode and
contrast. Set the output size so that
it appears as 44x58 on the message
display.
DIVISION PRINTING
Printing two halves of a larger poster from one input document is called division printing.
input
document
division print
PRINTING DIFFERENT POSTER SIZES
5
Place the original into the document
bay face down. Press the start/stop
key to begin printing. The left side of the original will be
printed first. When the printing
process is complete, cut the print with
the cutter.
When the left side is complete, the output size on the message
display will automatically change to 44x58 .
Make sure the original is placed firmly along
the document guide closest to you, and into
the scanner until it stops.
cutting mark