Printing in reverse mode – FujiFilm 3000 User Manual

Page 19

Text mode
Original mode

PRINTING IN REVERSE MODE

Press the paper type key to select the
type of paper being used.

Press the mode key to set the printer
in reverse mode. Select the desired
output size and level of contrast.

Place the original into the document
bay face down. Press the start/stop
key to begin printing.

Points to note when using reverse mode

• The printer is designed to monitor the temperature of the

thermal heads and to control printing speed so as to prevent
them from overheating.
(If this happens, a ‘SLOW MODE’ message will appear on the
message display.)

input

document

reverse mode

The paper type is shown here.

'REVERSE' is shown here.