FujiFilm 3000 - Manual (Page 24)

22
ADDITIONAL FUNCTIONS
0:
The poster is printed without gaps between
the pages
1:
The poster is printed with gaps between
the pages
Initially, the printer is set at 1.
The white gaps between pages can be eliminated when printing
banners from a series of original sheets.
Vertical lines which may show up on the printed
image can be adjusted to appear less conspicuous.
For dark lines, press the mode key to reduce the
setting level. For white lines, press the contrast
key to increase the setting level.
Note that it is difficult to completely eliminate
lines that appear on the output document.
Horizontal lines which may show up on the printed
image can be adjusted to appear less conspicuous.
For dark lines, press the mode key to reduce the
setting level. For white lines, press the contrast
key to increase the setting level.
Note that it is difficult to completely eliminate lines
that appear on the output document.
Thermal head printing power can be adjusted to any of
19 levels. Press the mode key (-) and the contrast key
(+) to shift the setting one level in that direction.
Caution
¥ If ÔNoÕ is selected for page gap,
cutting marks will not be printed on
the poster.
¥ If ÔNoÕ is selected for page gap, be
sure to press the paper feed key
before cutting the banner.
- 4 ¥ ¥ ¥ + 0 ¥ ¥ ¥ + 4
minimum normal maximum
Function / Description Message display
Image
direction
The direction of the image can be changed to create
a mirror image of the original.
0:
The poster is printed in its original direction
1:
The poster is printed as a mirror image
of the original
Initially, the printer is set at 0. 0:NORMAL 1:MIRROR
Page
gap
Vertical
line
adjustment
Horizontal
line
adjustment
Printing
power
0:NO
1:YES input documents
margins
vertical
lines
output direction
horizontal
lines
output direction
9 levels
Initially, the printer is set at + 0.
- 8 ¥ ¥ ¥ + 0 ¥ ¥ ¥ + 8
minimum normal maximum
17 levels
Initially, the printer is set at + 0.
- 9 ¥ ¥ ¥ + 0 ¥ ¥ ¥ + 9
minimum normal maximum
19 levels
Initially, the printer is set at + 0.
MODE key CONTRAST key
hold
6
FUNCTION MODE
The following parameters can be input into the printer, to adjust printing functions and quality.
Function Description and Messages