FORD Vehicle - Manual (Page 329)

330
* [SV22100( ALL)10/89] 3. Start and idle the engine until the thermostat
opens and the radiator upper hose becomes
warm.
* [SV22200( ALL)05/95] 4. Shut off the engine and allow the engine to
cool. Cover the radiator cap with a thick
cloth and cautiously remove it. Step back
while the pressure releases.
* [SV22500( ALL)10/89] 5. Finally, check the radiator and add more
engine coolant if needed, following the
procedures noted above. Reinstall the
radiator cap securely, when finished.
* [SV22525( ALL)05/90] 6. If more engine coolant is necessary, fill the
overflow reservoir to the appropriate level
marked on the bottle.
* [SV22700(BEF )03/95]
Windshield Washer Fluid and
Wipers
* [SV22800(BEF )03/95]
Washer Fluid
* [SV22900(BEF )01/95] Check the level of the windshield washer fluid
every time you stop for fuel. The reservoir for
the windshield washer fluid is located in the
engine compartment.
* [SV23200(BEF )03/95] Adding washer fluid
* [SV23300(BEF )05/95] RWARNING
Do not put windshield washer fluid in the
container for the engine coolant.
File:ltsvf.ex
Update:Thu May 9 15:30:19 1996