FORD Vehicle - Manual (Page 263)

262
* [RE13500( F )01/89] When the truck is ordered with a spare wheel
only (no tire), it is stowed with a wood spacer
in the usual spare tire location. Remove the
wood spacer before installing the spare tire and
wheel.
* [RE13600( F )01/89] After the spare tire and wheel are stowed, adjust
the driver side channel ball end bolt and the
eyebolt as necessary until the tire cannot be
moved by hand pressure.
* [RE15100(BEF )05/95] RWARNING
Make sure the spare tire and jacking
equipment are stowed and secured in the
proper storage location.
% * [RE15200( ALL)03/95] Preparing to Change the Tire
* [RE15250( ALL)12/91] NOTE: To lift your vehicle by other than the
front or rear jacking points, be sure to
use only hoist adapters with a wide
contact surface.
* [RE15300(B F )03/91] 1. Make sure that your vehicle will not move
or roll. If you have an automatic
transmission, put the gearshift in Park. If
you have a manual transmission, put the
gearshift in Reverse. Set the parking brake
and block the wheel that is diagonally
opposite the tire that you are changing.
* [RE15335(B F )12/91] NOTE: Make sure the ignition is in the OFF
position.
File:ltref.ex
Update:Thu May 9 15:24:41 1996