FORD Vehicle User Manual
Page 21
18
[SR08550( EF )05/95]
one third page pica art:0020639-D
Unfastening the outboard lap/shoulder belts
[SR08650(BEF )05/95]
2.
While the belt retracts, guide the tongue to
its stowed position. If you do not guide the
tongue, it may strike you or part of the
vehicle.
*
[SR08800(BEF )03/95]
How to Untwist or Unjam a Safety Belt
Retractor
*
[SR08900(BEF )03/95]
If you should jam the lap belt retractor by
allowing the belt to retract when it is twisted,
you can free the webbing with this procedure:
*
[SR09000(BEF )03/95]
1.
Pull on the belt with both hands to tighten it
on the retractor spool.
*
[SR09100(BEF )03/95]
2.
Feed the belt back into the retractor until it
is completely retracted. Repeat previous step
if necessary.
[SR09200(BEF )02/95]
3.
Pull the belt out of the retractor as far as it
will go and untwist the belt or remove the
object that is jamming the belt. Let the belt
retract.
*
[SR09300(BEF )03/95]
4.
Then, pull the belt out and let it retract
several times to make sure that the belt
works properly.
File:ltsrf.ex
Update:Thu May 9 15:26:26 1996