FORD Vehicle - Manual (Page 159)

157
* [AS23200(BEF )04/95]
❑ Setting the Station Memory Preset buttons
* [AS23250(BEF )05/95] Your radio is equipped with 5 station
memory buttons. These buttons can be used
to select up to 5 preset AM stations and 10
preset FM stations (5 in FM1 and 5 in FM2).
* [AS23400(BEF )02/95] Follow the easy steps below to set these buttons
to the desired frequencies:
* [AS23500(BEF )04/95] 1. Select a band, then select a frequency.
* [AS23700(BEF )04/95] 2. Press one of the memory buttons and hold
the button until the sound returns. That
station is now held in memory on that
button.
* [AS23800(BEF )04/95] 3. Follow the two steps above for each station
memory preset button you want to set.
* [AS23900(BEF )04/95] NOTE: If the vehicle’s battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
* [AS24000(BEF )02/95] Adjusting the tone balance and speaker
output of your radio
* [AS24150(BEF )05/95] Push the “AUDIO” button repeatedly until
the display reads “BASS.” Push the right (+)
side of the “VOLUME” button to increase
bass (more “lows”), and push the left (-) side
to decrease bass (less “lows”).
* [AS24300(BEF )04/95]
❑ Increasing or decreasing treble response
* [AS24350(BEF )05/95] Push the “AUDIO” button repeatedly until
the display reads “TREB.” Push the right (+)
side of the “VOLUME” button to increase the
treble (more “highs”), and push the left (-)
side to decrease treble (less “highs”).
File:ltasf.ex
Update:Thu May 9 15:15:21 1996