FUJITSU LIFEBOOK B142 User Manual

Page 59

Four

U s e r I n s t a l l a b l e F e a t u r e s

L i f e B o o k B S e r i e s f r o m F u j i t s u

To Install the Port Replicator:
The Port Replicator can be installed on your
notebook while the power is on, while in
Suspend mode, or while the power is off.

1. Open the Docking Connector cover on the

rear panel of your notebook to expose the
Docking Connector.

2. Align the Docking Connector on the rear

panel of your notebook with the Docking
Connector on the front panel of the Port
Replicator. (Figure 4-3.)

3. Push the Port Replicator and the notebook

together until the docking connectors are
fully engaged. (Figure 4-3.)

4. Turn the Port Replicator Attachment Knobs

clockwise to secure the connection between
the Port Replicator and the notebook. You
may have to push the knob in slightly to
engage the threads. (Figure 4-4.)

Figure 4-2 Port Replicator Rear Panel

Port Replicator
Attachment Knob

PS/2 Port

External Floppy
Disk Drive Port

Serial Port

Parallel Port

External
Monitor Port

Port Replicator
Attachment Knob

Figure 4-3 Connecting the Port Replicator

Docking Connector

Figure 4-4 Securing the Connection

Port Replicator
Attachment Knob

Figure 4-5 Releasing the Connection

Port Replicator
Attachment Knob

Figure 4-6 Removing the Port Replicator

Docking Connector