FARGO electronic M30e - Manual (Page 29)

Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) 29
Using the Image Color Capabilities
Following the Dye-Sub Intensity Procedure
Command Line
Usage CUPS option Description
DyeSubIntensity=0
<-50 to 50>
Dye-Sub Intensity (YMC) = 0 1. Adjust the Dye-Sub Intensity
value higher to use more heat
when transferring dye-sub
colors to the card. (Note: This
will produce a darker, more
saturated image.)
2. Adjust the dye-sub Intensity
value lower to use less heat
when transferring dye-sub
colors to the card. (Note: This
will produce a lighter print.)
Following the Resin Heat Front Procedure
Command Line
Usage CUPS option Description
ResinHeatFront=0
<-100 to 100>
Resin Heat Front (K) = 0 1. Adjust the Resin Heat Front
value higher to use more heat
to transfer resin to a card.
2. Adjust the Resin Heat Front
value lower to reduce the
amount of heat (used to
transfer resin to the card).