FARGO electronic M30e - Manual (Page 17)

Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) 17
Selecting the Ribbon Types
Command Line Usage CUPS option Description
Ribbon = StandardResin Ribbon Type =
Standard Resin Sets the Ribbon type for the print
job to Standard Resin.
Ribbon = PremiumResin Ribbon Type =
Premium Resin Sets the Ribbon type for the print
job to Premium Resin.
Ribbon = ColoredResin Ribbon Type =
Colored Resin Sets the Ribbon type for the print
job to Colored Resin. This option
should be used for any of the
colored resin Ribbons (Red,
Blue, Green, or White)
Ribbon = MetallicResin Ribbon Type =
Metallic Resin Sets the Ribbon type for the print
job to Metallic Resin. This option
should be used for any of the
metallic resin Ribbons (Gold,
Silver).
Ribbon =
KOPremiumResinWithOvelay Ribbon Type =
KO Premium
Resin with
Overlay Sets the Ribbon type for the print
job to KO
– Premium
Resin/Overlay.
Ribbon =
BODyeSubBlackWithOverlay Ribbon Type =
BO Dye-Sub
Black with
Overlay Sets the Ribbon type for the print
job to BO
– Dye Sub Black withy
Overlay