FUJITSU SPARC ENTERPRISE T5120 - Manual (Page 55)

Important Information About the SPARC Enterprise T5120 and T5220 Servers 45
Intermittent Issue With netsc commit and showsc Hang
(CR 6549028)
The netsc_commit command could cause the system to hang. For example:
Through a serial connection, the network might not be visible.
Workaround: Reboot the system:
If rebooting fails to reset the SP, AC power-cycle the system to recover the SP. Note
that you will lose active domains.
Use of consolehistory -e Results in SP Becoming
Unusable (CR 6587869)
Do not use consolehistory -e with a value greater than 1000 lines. If you want
to see the entire consolehistory log, use the -v option instead.
sc> setsc netsc_ipaddr 12x.14x.4x.1x
sc> showsc netsc_ipaddr 12x.14x.4x.1x
sc> setsc netsc_ipnetmask 255.255.255.0
sc> showsc netsc_ipnetmask 255.255.255.0
sc> setsc netsc_commit true
<--- HUNG
sc> showsc netsc_ipaddr 12x.14x.4x.1x
sc> shownetwork
SC network configuration is:
^C
^C
^C
^C
IP Address:
Gateway address:
Netmask:
Ethernet Address:
sc> resetsc -y
Performing hard reset on the SC failed
resetsc: No such inventory
sc>
# init 6