FUJITSU SPARC ENTERPRISE T5120 - Manual (Page 53)

Important Information About the SPARC Enterprise T5120 and T5220 Servers 43
The following is sample output of sending a break to the Solaris host from the
ALOM CMT compatibility CLI:
1. Log into the host with the console command.
2. Enter #. to return to the host prompt.
3. Enter #. to escape to the SP ALOM CMT compatibility CLI. The escape sequence
is not echoed.
4. Enter the break command.
5. Enter #. to return to the SP ALOM CMT compatibility CLI.
The following is sample output of sending a break to the Solaris host from the SP
ILOM CLI:
1. Log into the host with the ILOM console command.
2. Enter #. to escape to the SP ILOM CLI. The escape sequence is not echoed.
sc> console
sc> #.
Solaris-host-prompt>
Solaris-host-prompt> #.
sc>
sc> break -c -y
sc> #.
c)ontinue, s)ync, r)eboot, h)alt?
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.
Solaris-host-prompt>
Solaris-host-prompt> #.
->